The Blackmagic Design HyperDeck Studio HD Plus is a compact HDMI and 6G-SDI capable external capture and play back device for Blackmagic ATEM switchers that records to UHS-II SD bays. Key features include:
Desktop broadcast deck for capture / playback over 6G-SDI or HDMI 2.0
Records uncompressed 10-bit, ProRes, or DNx to dual UHS-II SD card bays
Compatible with all ATEM switchers
On-board display and illuminated controls
This rental does not include SD media, HDMI, SDI, or USB cables, or an ATEM switcher.
When used with an ATEM switcher, you will need some form of ethernet hub (not included). If you have any questions about using the HyperDeck with your existing network contact us and a tech will be happy to help you determine if this is the right gear for you.
Yes! This device is equipped with a single 1/4" audio outputs for direct monitoring.
Need a 1/4" to 1/8" adapter for your headphones? No problem! While we don’t include an adapter by default, we will add one at no additional cost when requested in the special instructions box at checkout!
You can connect up to four HyperDecks to any ATEM running firmware version 6.8 or newer.
Audio Inputs | Analog |
Audio Outputs | Analog |
Audio Type | Switching |
Brand | Blackmagic |
Codec / Format Support | Uncompressed QuickTime (up to DCI 4K/30p) |
Color Precision | 10-bit |
Color Space | REC 601, REC 709, REC 2020. 33 point 3D LUTS can be applied to SDI monitor out. |
Computer Interface | USB Type-C 3.0 (up to 5Gb/s) for external drive recording, webcam out, software configuration and updates. |
Audio Inputs | Analog |
Audio Outputs | Analog |
Audio Type | Switching |
Brand | Blackmagic |
Codec / Format Support | Uncompressed QuickTime (up to DCI 4K/30p) |
Color Precision | 10-bit |
Color Space | REC 601, REC 709, REC 2020. 33 point 3D LUTS can be applied to SDI monitor out. |
Computer Interface | USB Type-C 3.0 (up to 5Gb/s) for external drive recording, webcam out, software configuration and updates. |