The Sennheiser EW-DX Two Channel Combo Wireless System (Q1-9) is an all-in-one kit that provides two microphones and transmitters along with a receiver. Key features include:
Equidistant tuning grid with 3,200 frequencies
134 dB of dynamic range, 24-Bit audio
12-hour battery life via included batteries
Includes handheld and bodypack transmitters w/ microphones
All In One. The Sennheiser EW-DX Two Channel Combo Wireless System (Q1-9) comes with everything you need for a two-person setup but the flexibility to expand. The included bodypack transmitter works from up to 330 feet away from the receiver, includes a display, mute button, and function buttons, boasts a 134 dB dynamic range, and pairs with the locking lav mic with an omnidirectional pickup pattern. The handheld microphone has a transmitter built in with all the same features and includes a dynamic capsule with a cardioid polar pattern for background noise reduction. This capsule can be swapped out for others with different profiles, but this kit only includes one. Each of these transmitters pair with the included EM 2 receiver with room to add many more transmitters and both will include rechargeable batteries.
All-Day Battery. Each of the BA70 batteries included in this kit can power either transmitter for up to twelve hours. These batteries take only three hours to recharge, but the transmitters can be powered for up to eight hours via AA batteries (not included) if you need a backup.
Wireless Receiver. The EM 2 receiver operates in the UHF band to enhance range up to 330 feet and to avoid interference in the 2.4 GHz band. Its 80 MHz bandwidth offers up to 3200 frequencies to choose from, ensuring you can find a clean channel. Switching diversity protects your signal against RF interference by comparing incoming signals with two independent antennas on separate circuits to maintain wireless quality, only switching when it won’t affect audio information. The EM 2 also boasts powerful encryption to secure your transmission and an equidistant tuning grid to eliminate frequency coordination between channels. Each receiver supports two transmitters and two channels of audio.
Fast, Easy, Dependable. The EM 2 receiver provides intuitive front panel controls along with two OLED screens perfect for displaying RF meters, transmitter battery levels, and audio output. The back panel features two balanced XLR outputs along with two unbalanced 1/4" outputs to connect directly to a PA system or mixing board. The EM 2 is a rackmount receiver, but hardware won’t be included with this rental.