Does not include
BirdDog IR Remote
The BirdDog Eyes P200 is a full-NDI capable PTZ camera that can transmit 140 Mbps 1080/60p video from its Sony backlit sensor. Key features include:
Sony 1/2.8" backlit CMOS sensor with 2.13 MP
30x optical zoom with a 4.3mm to 129mm focal length
Simultaneous full NDI, SDI, HDMI, and CVBS outputs
Maximum 1080/60p resolution at a 140 Mbps bitrate via full NDI streaming
You have to set and save your settings and presets in the BirdUI to preserve them when you cycle the camera’s power.
You can adjust the resolution and frame rate through the WebUI and the IR remote. The dial has been phased out in recent firmware updates and can no longer be used to make adjustments.
All of our BirdDog cameras ship configured for DHCP, with the default web browser ID printed on the bottom of the camera so all you need to do is enter the web address in a browser window to get started. Once you access the web remote, you will need to enter the default password: birddog, one word, lowercase.
Please note that because we make every effort to ensure this camera ships in the simplest, default state, you may be subject to a camera ID recovery fee if you return the camera with a unique web ID.
You can control basic camera moves using the BirdDog IR remote, which is available here as a separate rental item.
For fine movement control, you’ll need the BirdDog PTZ Keyboard or the BirdDog P200 Basic Streaming Kit w/ RS232 Remote PTZ Control.
Brand | BirdDog |
Camcorder Type | PTZ |
Camera Type | Camcorder |
Inputs/Outputs | Video Outputs
|
Item Type | Camera and PTZ Cameras |
Lens | Focal Length
|
Power Supply | 12v DCm, PoE+ (IEEE 802.3at) |
Robotics | Pan
|
Does not include
BirdDog IR Remote
Brand | BirdDog |
Camcorder Type | PTZ |
Camera Type | Camcorder |
Inputs/Outputs | Video Outputs
|
Item Type | Camera and PTZ Cameras |
Lens | Focal Length
|
Power Supply | 12v DCm, PoE+ (IEEE 802.3at) |
Robotics | Pan
|