We have a plethora of compatible Ikelite accessories that have different uses depending on what you need.

Most Ikelite users like to add dive weights to help balance things while you’re down under, and you can find a few choices to pick between in the Recommended section of your screen.

These dive weights will require the Ikelite Trim Weight System for Underwater Housings to attach to your Ikelite housing.

This Housing is only compatible with the Sony a7R V. As far as lenses go, we recommend the Sony E 10-18mm f/4 OSS, Sony FE 12-24mm f/2.8 GM, Sony FE 14mm f/1.8 GM, and Sony FE 16-35mm f/2.8 GM.

Please note that these lenses will need additional ports that may not be included in this rental package. Check out Ikelite’s port chart to ensure you’re getting everything you need.

To prevent salt build-up, it is recommended that the empty and sealed Ikelite housing be rinsed with fresh water. To prevent salt build-up around the controls, submerge the housing in a rinse tank and operate the buttons to flush out any debris or residue. Wipe dry with a lint-free cloth following any rinse. To avoid flooding, do not leave the Ikelite in a rinse tank.

Please note, the housing should always be sealed before coming into contact with any water. It is also recommended that the camera be removed from the housing before cleaning. Do not use cleaning agents on the housing or lens port as incompatible chemicals can compromise the plastic or o-rings, resulting in leaks.

No. You should always remove the camera from the housing for travel and storage. For best performance, store the camera and Ikelite housing in a shaded place when not in use to protect from overheating.

Always recheck the o-ring after opening the housing.